PRODUCT FEATURES/SPECS |
GLOSS |
SATIN |
CRACKLE |
| Coefficient of friction* | dry: 0.98 / wet: 0.33 | dry: 0.74 / wet: 0.34 | dry: 0.98 / wet: 0.33 |
Durability classification/PEI |
1 | 2 | 1 |
| Glaze Hardness | 6.5 MOHS | 7.0 MOHS | 6.5 MOHS |
| Break Strength | 250 lbs. psi | 250 lbs. psi | 250 lbs. psi |
| ANSI A 137.1 Standard Grade | pass | pass | pass |
| Water Absorption | 10-12% | 10-12% | 10-12% |
- Crackle is intended for walls only.
- Recommended for interior use only.
- Crackle tiles must be sealed prior to and after grouting.
- Crackle tile has a mid-range shade variation. The amount of crackle will vary from lot to lot.
- Not all shapes are manufactured with the crackle finish. Products not recommended for the crackle finish are noted in the catalog and pricelist.
- Due to local raw materials and unique manufacturing techniques, variations in body and color from tile to tile are to be expected. This is considered desirable and inherent due to the hand crafted processing of our product.
- Can I use APC tile on my bathroom, kitchen, or shower floor?
Gloss is not recommended for the floor, however satin and matte can be used on all residential floors. - Do you recommend sealing the crackle finish?
A sealer should be applied before and after grouting and is recommended for the crackle finish due to contaminants getting into the cracks. The sealer should be applied per manufactuer’s instructions and the brand to use can be determined by the contractor/buyer. - Does the tile shade vary? By how much of a range?
The shade varies within industry standards: deltaE<1.0. Slight variations in shade are to be expected. - Can I put APC tile near a fireplace or a stove?
Yes, if properly grouted and installed in compliance with local regulations. - What cleaners are recommended?
A neutral pH non-detergent cleaner.
All products should be inspected immediately after purchase. Any defects must be reported to
Westminster Ceramics™, LLC prior to installation. Upon installation the product is considered to have been accepted by the consumer. Due to variations in local raw materials and unique manufacturing techniques, differences in texture and color from one product to another should be expected. Such differences are considered desirable and inherent in the products, enhancing the attractiveness of the product. As is typical in the industry, variations in surface texture and product dimensions should be expected.
If a warranted defect is found within one year after purchase, Westminster Ceramics™, LLC, at its discretion, will repair or replace the product or will make appropriate reparations where reasonable inspection discloses any such defect occurring in normal usage. Westminster Ceramics, LLC shall not be liable for any expense associated with the replacement of the product (removal, installation or reinstallation). No warranty is offered for repair or replacement of any product as a result of crazing, scratching or wear caused by abuse, misuse, use of improper chemicals or similar incidents nor for damage caused by improper installation.